Contact Home Links Search

Cone Exhuaust Fan EC 50

USGR offers a wide variety of exhaust fans for many industries, engineered, designed and priced to meet all climates of the world.

EC 50EC50 cone fan, a 50' fat equipped with cone discharge, is the ideal fan for high airflow capacity at high static pressures and low energy consumption.

The unique propeller design is self-cleaning and allows the highest efficiency to be reached, while the discharge cone boosts the airflow dramatically:

The square fan housing, cone discharge and air conveyor (venturi) are mode of a strong galvanised sheet-steel. The 3-blade, propeller is statically and dynamic balanced for low noise and low vibration. The propeller is available in stainless steel, galvanised steel and precoated. galvanised steel.

To improve aerodynamic efficiency and reduce pressure losses the cone fan design has been developed in Munters euroemme's R&D lab. The test chamber has been built according to ANSI / AMCA 210-85 Figure 5 specifications. Construction details and airtightress have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois USA.

Propeller, Cone Discharge and Shutter

Principle  of the climateThe propeller is attached to a large v-belt pulley in which is embedded a double ball bearing protected against water. The belt transmission ensures low propeller rpm, which ensures high efficiency, low energy consumption as well as low anise. 'the cone-discharge is made in I separate pieces to assist with knock-down transportation, and all it galvanised steel.

The shutter is made of galvanised steel for all models. which is stronger than aluminum and plastic. The fan shutter is tightly closed when the fan is not working preventing any air leakage through the fan. The patented centrifugal system prohibits the shutter from being closed by air pressure, keeping the efficiency of the Ian at a peak at all times by keeping the shatter fully and firmly opened. The shutter does not have to be cleaned regularly as dust does not affect its opening and closing movement. All the plastic parts are made of acetalic plastic with UV, protection.

Equipment

  • Fan housing, cone and venturi made of strong galvanised sheet-steel
  • Shutters are made of pressed galvanised steel in order to assure highest strength
  • Each motor is individually tested for 100% quality control
  • Central hub and v-belt pulley are made from diecast aluminium
  • Optional belt-tensioner available for increased v-belt life and reduced maintenance
  • 3-blade propeller is statically and dynamically balanced
  • Shutter bearings are maintenance free
  • Patented centrifugal system permits a fully and firm opening of the shutter
  • Shutter is opened by rotating weights placed over centrifugal system arms
  • Shutter opening is not affected by the weight of dust deposited on shutter blades
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating
  • Every fan is individually checked for quality

Order Information

EM50-X-X-X-X-X e.g., EC50-b-2-wm-wCEm-wt

  • b : Code for electric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeller blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)
    • wCEm: Fan delivered with CE mesh on outlet side (standard)
    • nCEm: Fan delivered without EC mesh on outlet side (standard)
    • wt: Fan delivered with belt-tensioner.
    • nt: Fan delivered without belt-tensioner (standard).

Motor Specifications

EC 50
Code
Nominal power Type
phases
Speed Frequency
[hz]
Voltage
[V]
Current
[A]
rpm
[w] [hp]
a 735 1.0 1 single 50 230 5 1,380
b 735 1.0 1 single 60 220 - 240 5 1,700
c 735 1.0 3 single 50 230 / 400 3.5 / 2 1,400
d 735 1.0 3 single 60 230 / 400 3.5 / 2 1,700
e 1,100 1.5 1 single 50 230 7.3 1,400
f 1,100 1.5 1 single 60 220 - 240 7.3 1,700
g 1,100 1.5 3 single 50 230 / 400 5.2 / 3 1,360
h 1,100 1.5 3 single 60 230 / 400 5.2 / 3 1,700

Technical Specifications

  1.0 hp 1.5 hp
Weight of fully equipped fan1 [kg] 106 108
Nominal propeller speed [rmp] 455 565
Airflow at 0 Pa1 [m3/h] [cfm] 40,420 [23,790] 46,260 [27,230]
Airflow at 20 Pa1 [m3/h] [cfm] 35,650 [20,980] 43,250 [25,455]
Specific performance at 0 Pa1 [m3/wh] [cfm/w] 38.6     [22.7] 31.8     [18.7]
 
Propeller diameter [mm] [inch] 1,270 [50]
Number of blades   3
Number of shutter blades   10
Max. operating temperature [°C] [°F] 50 [122]
IEC protective class of electric motor   IP55
Electric motor winding insulation grade   F
1 Value refered to fan with tensioner and pyramidal mesh 3 phases 50 Hz motor.
2
All values refer to 3 phases 50 Hz single speed motor.
N.B Airflow data are measured at standard condition (20 °C, 1013 hPa).

EM 50n is developed and produced by Munters euroemme S.p.A., Italy.



Copyright © 1998-2015 U.S. Global Resources (USGR). All rights reserved.
Contact USGR :: Top
Web site developed by Infothai CM Co., Ltd.