Euroemme Exhaust Fans,
Cone Fans, Recirculators

EM50 Fans, EM30 Fans, EM24 Fans

    Equipment

  • EM50Fan housing and venturi made of strong galvanised sheet-steel.
  • Shutters are made of pressed galvanised steel in order to ensure highest strength.
  • Each motor is individually tested for 100% quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Welded wire guards divided into two parts ensure easy maintenance.
  • Propeller is statically and dynamically balanced.
  • Shutter bearings are maintenance free.
  • Patented centrifugal system permits a fully and firm opening of the shutter.
  • Shutter is opened by rotating weights placed over cen. trifugal system arms.
  • Shutter opening is not affected by the weight of dust deposited on shutter blades.
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating.
  • Every fan is individually checked for quality

EM50

EM50

Order Information

EM50-X-X-X e.g., EM50-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys ( on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EMS50 Air Recirculator

    Equipment

  • EMS50Fan housing and venturi made of strong galvanised sheet-steel.
  • Each motor is individually tested for 100% quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Welded wire guards divided into two parts ensure easy maintenance.
  • Propeller is statically and dynamically balanced.
  • Special threaded bushes on fan's side panels permit the fan to be easily hung.
  • Every fan is individually checked for quality.

EMS50

Order Information

EMS50-X-X-X e.g., EMS50-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys (on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EC50 Cone Fan

    Equipment

  • EC50Fan housing , cone and venturi made of strong galvanised sheet-steel.
  • Shutters are made of pressed galvanised steel in order to assure highest strength.
  • Each motor is individually tested for 100% quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Optional belt-tensioner available for increased vbelt life and reduced maintenance.
  • 3-blade propeller is statically and dynamically balanced.
  • Shutter bearings are maintenance free.
  • Patented centrifugal system permits a fully and firm opening of the shutter.
  • Shutter is opened by rotating weights placed over centrifugal system arms.
  • Shutter opening is not affected by the weight of dust deposited on shutter blades.
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating.
  • Every fan is individually checked for quality.

EC50

EC50

Order Information

EC50-X(1)-X(2)-X-X-X(3)

  • (1) : Code for eletric motor according to above table.
  • (2) : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • (3) : Options codes
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard).
    • wCEm: Fan delivered with CE mesh on out let side.
    • nCEm: Fan delivered without CE mesh on outlet side (standard).
    • wt: Fan delivered with belt-tensioner.
    • nt: Fan delivered without belt-temsioner (standard)

EM36 Exhaust fan

    Equipment

  • EM36 Fan housing and venturi made of strong galvanised sheet-steel.
  • Shutters are made of pressed galvanised steel in order to ensure highest strength.
  • Each motor is individually tested for 100% quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Propeller is statically and dynamically balanced.
  • Shutter bearings are maintenance free.
  • Patented centrifugal system permits a fully and firm opening of the shutter.
  • Shutter is opened by rotating weights placed over centrifugal system arms.
  • Shutter opening is not affected by the weight of dust deposited on shutter blades.
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating.
  • Every fan is individually checked for quality.

EM36
Curves refer to EM36 3Ph 50 Hz single speed motor. Fan tested with shutter and wire mesh.

EM36-X-X-X e.g., EM36-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys (on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EMS36 Air Recirculator

    Equipment

  • EMS36Fan housing and venturi made of strong galvanised sheet-steel.
  • Each motor is individually tested for 100"/o quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Propeller is statically and dynamically balanced.
  • Special threaded bushes on fan's side panels permit the fan to be easily hung.
  • Every fan is individually checked for quality.


Curves refer to EMS36 3Ph 50 Hz single speed motor.

EMS36-X-X-X e.g., EMS36-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys (on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EM30 Exhaust Fan

    Equipment

  • EM30Fan housing and venturi made of strong galvanised sheet-steel.
  • Shutters are made of pressed galvanised steel in order to ensure highest strength.
  • Each motor is individually tested for 100% quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Propeller is statically and dynamically balanced.
  • Shutter bearings are maintenance free.
  • Patented centrifugal system permits a fully and firm opening of the shutter.
  • Shutter is opened by rotating weights placed over cen. trifugal system arms.
  • Shutter opening is not affected by the weight of dust deposited on shutter blades.
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating.
  • Every fan is individually checked for quality.

EM30

EM30-X-X-X e.g., EM30-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys (on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EMS30 Air Recirculator

    Equipment

  • EMS30Fan housing and venturi made of strong galvanised sheet-steel.
  • Each motor is individually tested for IN" % quality control.
  • Central hub and v-belt pulley are made from die-cast aluminium.
  • Propeller is statically and dynamically balanced.
  • Special threaded bushes on fan's side panels permit the fan to be easily hung.
  • Every fan is individually checked for quality.

EMS30

EMS30-X-X-X e.g., EMS30-b-2-wp-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE protection for belt and pulleys (on mesh side, standard in Europe)
    • np: Fan delivered without plastic CE protection for belt and pulleys (on mesh side, standard outside Europe)
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

ED24 Eshaust Fan

    Equipment

  • ED24Fan housing and venturi made of strong galvanised sheet-steel.
  • Shutters are made of pressed galvanised steel in order to assure highest strength.
  • Each motor is individually tested for 100% quality control.
  • Propeller is statically and dynamically balanced.
  • Shutter bearings are maintenance free.
  • Patented centrifugal system permits a fully and firm opening of the shutter.
  • Shutter is opened by rotating weights placed over centrifugal system arms.
  • Shutter opening is not affected by the weight of dust deposited on shutter blades.
  • A powerful couple of springs keep the shutters firmly closed when the fan is not operating.
  • Every fan is individually checked for quality.

ED24

ED24-X-X-X e.g., ED24-b-2-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wm : Options codes
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

EDS24 Air Recirculator

    Equipment

  • EDS24 Fan housing and venturi made of strong galvanised sheet-steel.
  • Each motor is individually tested for 100"/o quality control.
  • Propeller is statically and dynamically balanced.
  • Special threaded bushes on fan's side panels permit the fan to be easily hung.
  • Every fan is individually checked for quality.

EDS24

EDS24-X-X-X e.g., EDS24-b-2-wm

  • b : Code for eletric motor according to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanised propeler blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wm : Options codes
    • wm: Fan delivered with pyramidal shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal shape mesh for CE protection on shutter side (standard)

Index Page | Evaporative Cooling Instructions | Ventilation
Acme | Euroemme Fans | Euroemme Munters | Aerotech | Small/hobby Coolers Portable Cooler | Cooling Pads | Fanjet | Circulation | Pipe and Water Distribution
Humidifan | Munters | Port-A-Cool | QuietCool | Arctic Circle

Copyright © 1998-2009 U.S. Global Resources (USGR). All rights reserved.
Contact USGR :: Top
Web site developed by Infothai CM Co., Ltd.
This page was updated on: