Contact Home Links Search

Dosmatic Models

Dosmatic offers the widest range of models in the industry with flow range from 0.03 gpm to 400 gpm and ratio range from 1:4000 to 1:5. We have summary information for choosing teh correct Dosmatic Injector.

MicroDos ® Injector Series

Dosmatic MicroDos IITiny and tough—the smallest injector in the industry

MicroDos Operating Principle

Installed directly in the fluid supply line, the injector operates without electricity, using fluid pressure as the power source. The fluid drives the injector, which pulls the required percentage of concentrate directly from the chemical solution container. Inside the Dosmatic, patented mixing chamber the concentrate is mixed with the fluid, and the fluid pressure forces the mixed solution downstream. The amount of concentrate will be directly proportional to the volume of fluid entering the injector, regardless of variations in flow or pressure.

Model Flow Rate Injection Ratios
Adjustable Range
Operating
Pressures
Inlet/Outlet
Connections
MicroDos II 2% 0.1 - 3.5 gpm 0.50 - 2% (1:200 - 1:50) 6 - 100 psi 1/2"
MicroDos II 5% 0.03 - 3.5 gpm 2 - 5% (1:50 - 1:20) 6 - 100 psi 1/2"

MiniDos®- 0.4%, 1%, 2.5%, 5%,10%, 20% Injector Series

Dosmatic MiniDos injectorThe most versatile injector in the industry
Replaces the A10 & A12 product lines.
Flow Rates 0.03 - 12 gpm (0,11 l/mn - 45,42 l/mn)
Injection Ratios 1:4000-1:5 (0.025%- 20%)

Operating Principle

Installed directly in the fluid supply line, the injector operates without electricity, using fluid pressure as the power source.

The fluid drives the injector, which pulls the required percentage concentrate directly from the chemical solution container. Inside the Dosmatic, patented mixing chamber the concentrate is mixed with the fluid, and the fluid pressure forces the mixed solution downstream.

The amount of concentrate Ill will be directly proportional to the volume of fluid entering the injector, regardless
of variations in flow or pressure.

Dosmatic offers the widest range of models in the Industry
with flow range from 0.03 gpm to 400 gpm and injection ratios from 1:8000 to 1:5
MiniDos 0.4% 0.03 - 12 gpm 0.025 - 0.4% (1:4000 - 1:250) 6 - 140 psi 3/4" npt
MiniDos 1% 0.03 - 12 gpm 0.20 - 1% (1:500 - 1:100) 6 - 140 psi 3/4" npt
MiniDos 2.5% 0.03 - 12 gpm 0.50 - 2.5% (1:200 - 1:40) 6 - 140 psi 3/4" npt
MiniDos 5% 0.03 - 12 gpm 1 - 5% (1:100 - 1:20) 6 - 140 psi 3/4" npt
MiniDos 10% 0.03 - 10 gpm 2 - 10% (1:50 - 1:10) 6 - 65 psi 3/4" npt
MiniDos 20% 0.03 - 7 gpm 4 - 20 % (1:25 - 1:5) 6 - 65 psi 3/4" npt

SuperDos®- 15TF, 20, 30, 45, 90 Injector Series

Dosmatic SuperDosLow dilution, high flow chemical injector in the industry
Replaces the Advantage line of injectors.
Flow Rates 0.04 - 90 gpm / 0,15 l/mn – 340.69 l/mn
Injection Ratios 1:200-1:20 or 0.5%-5.0%

Dosmatic introduces new “rotating” lower end on its SuperDos® 0.3% models for improved usability.

The SuperDos 0.3% models have been re-engineered with a rotating lower end. Dosmatic noticed a trend in customers having a twisted and tangled suction hose after adjusting the ratio sleeve on their lower ends. Dosmatic’s engineering department went to work on a solution and developed the rotating lower end. The improvements now allow the customer to adjust their ratio setting (can still be done while in operation) without having to deal with a twisted, tangled suction hose. Dosmatic has also added wrench flats to the suction tube fitting assembly to make maintenance easier and to avoid thread damage.

Model   Flow Rate Operating
Pressure
Pipe
Coupling
SuperDos15TF 15 gpm (60 max. psi) 04 - 15 gpm
(0,15 - 57 I/mn)
3 - 60 psi
(0,21 - 4,1 bar)
1" NPT/BSP
Model 0.3% 0.025% - 03% (1:4000 - 1:333)
Model 2.5% 0.2% - 2.5% (1:500 -1:40)
Model 5% 0.4% - 5% (1:250 -1:20)
SuperDos 20 gpm (100 max. psi) .04 - 20 gpm
(0,15 - 76 l/mn)
5 - 100 psi
(0,34 - 6,9 bar)
1" NPT/BSP
Model IA 0.2% - 2.3% (1500 - 1:44)
Model 0.3% 0.025% - 0.3% (1:4000 - 1333)
Model 2.5% 0.2% - 2.5% (1:500 - 1:40)
Model 5% 0.4% - 5% (1:250- 1:20)
SuperDos 30 gpm (100 max. psi) .15 - 30 gpm
(0,57 - 114 l/mn)
5 - 100 psi
(0,34 - 6,9 bar)
1" NPT/BSP
Model IA
0.2% - 2.3% (1:500 - 1:44)
Model 0.3%
0.025% - 0.3% (1:4000 -1233)
Model 2.5% 0.2% - 2.5% (1:500 -1:40)
Model 5% Model 5% 0.4% - 5% (1:250 -1:20)
SuperDos 45 gpm (100 max. psi) .50 - 45 gpm
(1,9 - 170 l/mn)
5 - 100 psi
(0,34 - 6,9 bar)
1 1/4" NPT/BSP
Model 0.3%
0.025% - 0.3% (1:4000 -1:333)
Model 2.5%
0.2% - 2.5% (1:500 -1:40)
SuperDos 80 gpm (100 max. psi) 1- 90 gpm
(3,8 - 341 l/mn)
5 - 100 psi
(0,34 - 6,9 bar)
1 1/4" NPT/BSP (Injectors)
2" slip on pipe connections
Model 2.5% 0.2% - 2.5% (1:500 - 1:40)
SuperDos 20 gpm (65 max. psi) .04 - 20 gpm
(0,15 - 76 l/mn)
5 - 65 psi
(0,34 - 4,5 bar)
1" NPT/BSP
Model 10%
2% - 10% (1:50 -1:10)
SuperDos 45 gpm (80 max. psi) .50 - 45 gpm
(1,9 - 170 I/mm)
5 - 80 psi
(0,34 - 5,5 bar)
11/4" NPT/BSP
Model 5% 0.4% - 5% (1:250 -1:20)

TurboDos®-100, 200 and 400 Injector Series

Dosmatic TurboDosHigh flow, where you need to go
Replaces the T100 Hybrid & T100 product lines. 
Flow Rates 20-400gpm or 75.70 l/mn-378,70 l/mn
Injection Ratios 1:4000-1:1000 or .013%-.10%

Dosmatic TurboDos high-flow; non-electric, fluid (water)-driven, proportional injectors offer an economical alternative to traditional electric technology or multiple non-electric injector parallel systems. Capable of injecting up to two chemicals accurately, independently and simultaneously; they reduce the need for multiple injectors. TurboDos can be used with 2" and 3" flange irrigation systems and with multiple installation options; making them ideal for high-flow injection applications.

Precise chemical injection—

Proportional positive displacement insures that just the right amount of chemical is injected. Despite fluctuations in flow rate and pressure,theTurboDos injector’s thorough and consistent mixing means that additives are used to maximum benefit. An adjustable ratio sleeve allows you to change your injection rates-- quickly and easily—to meet injection needs. Costs are reduced because of less wasted chemical in the injection process.

Model   Flow Rate Operating
Pressure
Pipe
Coupling
TurboDos 100 gpm (120 Min. psi l Single 20 -100 gpm
(76 - 379 Vmn)
Max continuous flow
75 gpm (284 l/mn)
20 - 120 psi
(1,38 - 8,3 bar)
2" Flange
Lower End 0.25% 0.025% - 0.25% ( 1:4000 - 1:400)
Lower End 0.5% 0.1%-0.5% (1:1000- 1:200)
Lower End 1% 0.5% - 1% (1:200 -1:100)
TurboDos 100 gpm (120 max. psi) Dual Injection: mix or match (2) lower ends based on your injection needs. 20 -100 gpm
(76 - 379 Vmn)
Max continuous flow
75 gpm (284 l/mn)
20 - 120 psi
(1,38 - 8,3 bar)
2" Flange
Lower End 0.25% 0.025% - 0.25% ( 1:4000 - 1:400)
Lower End 0.5% 0.1%-0.5% (1:1000- 1:200)
Lower End 1% 0.5% - 1% (1:200 -1:100)
TurboDos 200 gpm (120 max. psi) Single 40 - 200 gpm
(151 - 757 l/mn)
Max continuous flow
150 gpm
(568 I/mn)
30 - 120 psi
(2,1 - 8,3 bar)
3" Flange
Lower End 0.13%
0.05%- 0.13% (1:2000-1:800)
Lower End 0.25%
0.05% - 0.25% (1:2000 -1:400)
Lower End 0.5% 0.25% - 0.5% (1:400-1:200)
TurboDos 200 gpm (120 max. psi) Dual Injection: mix or match (2) lower ends based on your injection needs 40- 200 gpm
(151- 757 l/mn)
Max continuous flow
150 gpm (568 I/mn)
30 120 psi
(2,1 - 8,3 bar)
3" Flange
Lower End 0.13%
0.05% - 0.13% (1:20 00 - 1:800)
Lower End 0.25%
0.05%- 0.25% (1:2000 -1:400)
Lower End 0.5% 0.25% - 0.5% (1:400 -1:200)  
TurboDos 400 gpm (120 max. psi) Dual Injection: mix or match (2) lower ends based on your injection needs 40 -400 gpm
(151 - 1514 limn)
Maximum continuous flow 300 gpm (1136 I/mn)
30 - 120 psi
(2,1 - 8,3 bar)
3" Flange
Lower End 0.13%
0.05% - 0.13% (1:2000 -1:800)
Lower End 0.25%
0.05% - 0.25% (1:2000 - 1:400)
Lower End .5%
0.25% - 0.5% (1:400- 1:200)


TurboDos® Diesel 100, 200, 400 Injector Series

Dosmatic TurboDosDieselEliminates splash blending
Flow Rates 20-400gpm or 75.70 l/mn-378,70 l/mn
Injection Ratios 1:4000-1:1000 or .013%-.10%

Dosmatic TurboDos Diesel high-flow; non-electric, fluid (diesel)-driven, proportional injectors offer an economical alternative to traditional splash blending. Capable of injecting up to two chemicals accurately, independently and simultaneously; they reduce the need for multiple injectors.   Designed exclusively for diesel additive injection such as lubricity, de-icing, anti-gel, microbicide and winter/summer blend agents. Easy to install and maintain making them ideal technology with bobtail and transport truck deliveries suited with bulk storage facilities

The TuboDos Injector Series can be used for:

  • Injecting diesel additives 
  • Fire fighting and prevention applications, such as fire suppression foaming chemicals
  • Horticulture treatments, such as dispensing fertilizers, pesticides, herbicides, fungicides, acids, and disinfectants in high flow applications.
  • Water treatments for high flow applications that inject chemicals into residential and industrial water supplies.
Model   Flow Rate Operating
Pressure
Pipe
Coupling
TurboDos 200 gpm (120 max. psi)
Dual Injection: mix or match (2) lower ends based on your injection needs
40 - 200 gpm
(151 - 757 limn)
30 - 120 psi
(2,1 - 8,3 bar)
3" Flange
(76 mm)
Lower End 0.25% 0.05% - 0.25% (1:2000 - 1:400)
Lower End 0.5% 0.25% - 0.5% (1:400 - 1:200)
Lower End 1% 0.05% - 0.13% (1:2000 - 1:800)
TurboDos 400 gpm (120 max. psi)
Dual Injection: mix or match (2) lower ends based on your injection needs
40 - 400 gpm
(151 - 1514 I/mn)
30 - 120 psi
(2,1- 8,3 bar)
3" Flange
(76 mm)
Lower End 0.25% 0.05% - 0.25% (1:2000 - 1:400)
Lower End 0.5% 0.25% - 0.5% (1:400 - 1:200)
Lower End 1% 0.05% - 0.13% (1:2000 - 1:800)

MixPro® 15 & 25 Injector Series

Dosmatic MixPro injectorTried and tested technology
Flow Rates 0.09 gpm-11gpm/ 0,34 l/mn-41,64 l/mn
Injection Ratios 1:200-1:20 / 0.5%-5% 

Dosmatic’s standard injector. The MixPro 15 & 25 series are reliable, self-priming, easy to maintain and extremely cost-effective. We designed these injectors for use with non-aggressive chemicals, like fertilizers, soaps, termiticides as well as low acidic chemicals such as citric acid and fragrances.

The Dosmatic MixPro 15 & 25 injectors are used in a wide number of market applications— Animal Health, Fertilization, Flower Preservation, Garden Centers, Food Processing, Hydroponics, Odor/Misting Control and Cooling, Sanitation and Hygiene and Vehicle Wash.

Features Benefits
Water-driven, non-electric Ideal for remote areas
Proportional to flow of the water Less chemical waste
Accurate and repeatable Safe and consistent results
Low flow-mid flow range Accurate dispensing even when water output is low
Standard-Polyacetal Body
PVDF body also available
Cost effective, resistant to most chemicals
Self-priming, low maintenance. easy to install Less down time, installs with common plumbing

MixPro 25 (85 max. psi)

Model 0.2 - 2% 0.2% - 2% (1:500 -1:50)

Model 1- 5% 1% - 5% (1:100 - 1:20)

Flow Rate: .05 - 11 gpm (0,19 - 42lmn)

Operating Pressure: 5 - 85 psi (0,34 - 5,9 bar)

Pipe Coupling: 3/4" npt/ght/bsp

DOSMATIC® MOBILE SYSTEMS

Dosmatic mobile cartDOSMATIC® Mobile Systems are used in applications for:

Fertigation, Flower Preservation, Turf Care, Pest & Insect Control Weed Control, Sanitation, Bedding Plants, Container Crops, Field Crops, Hydroponics, Raised Beds, Tree Farms, Boom Irrigation, Drip Irrigation, Ebb & Flow Benches, Hose & Wand, Misting Systems, Sprinklers

You can always count on change—whether it’s a shift in the weather, location, or your requirements. Our Systems offer a superior rugged technology—just like our MiniDos and SuperDos injectors—so you get maximum durability along with the utmost usability.

Our TwistIIClean Filters are included with each system, so you get our 5 second patented filter cleaning. There’s no mess—and no disassembly. 

Also included are the barrel with a graduated decal for accurate measuring, and all necessary hardware and hosing. The injector is sold separately. Hoses connect at axle level on the Mobile Systems, to make them exceptionally stable—while helping to prevent a costly tip-over. Our Mobile Systems have narrow frames with a 17” wheelbase, for easy access to crowded areas. You can go where you need to be.

  Flow Rate Operating
Pressure
Injection
Ratio
30 GPM SuperDos with two hose capability
8 Galion/ 30.28 liters drum
.04-30 gpm 5-100 psi 1:500-1:20
MiniDos' with one hose capability
8 Galion/ 30.28 liters drum
.03-12 gpm 6-140 psi 1:4000-1:105


Copyright © 1998-2015 U.S. Global Resources (USGR). All rights reserved.
Contact USGR :: Top
Web site developed by Infothai CM Co., Ltd.