Contact Home Links Search

Seeders and Seeding Equipment :
Plug Dislodgers

Growing Systmes

Growing Tray

GROWING SYSTEMS' Convertible Plug Dislodger is designed to accommodate several sizes of plug trays, using a common frame. The entire unit is hot-dip galvanized after welding, and heavy duty construction assures positive alignment. Pins are made of aluminum.

  • Floor Model Plug Dislodger, equipped with 4-inch caster wheels, is easily moved to various locations.
  • Exchangeable Inserts and Hold-Down Units, installed with thumb screws, allow several plug tray sizes to be dislodged with one machine.
  • Available with Manual Foot Treadle or Automatic Air Assist.
  • Depth of pin penetration is adjustable.
  • The top hold-down cover is designed so the unit does not have to be locked during dislodging. Locking device is optional.
  • Pneumatic air cylinders (A) are automatically actuated when the guiding shelf (B) is rotated into position, locking the hold-down rods (C) tightly between rows of cells. This action is controlled by a micro-switch (D).
  • Effective hold-down of trays with staggered rows is accomplished by inserting tray under the long rods, which are adjustable for height and side-to-side positioning.
  • Model on front page is for trays with straight rows, using shorter rods for hold-down guides.

Aluminum rivets (A) "float" slightly, allowing the tapered end to locate the correct position under the drainage hole.

Holding rods (B) eliminate the need for a Hold-down lid, enabling tall plant material to be dislodged.

All Propagating and Plug Trays should be dislodged before transplanting, provided all such trays have good mechanically-made drainage holes.

Pricing Schedule for Models not listed:

Dislodger Main Frame with locking device $0.00
Tray Insert/Hold-Down Device $0.00
Pins@$1.54 Per Cell (Example-288) $0.00

Pricing Schedule for Additional Tray Inserts:

Tray Insert/Hold-Down Device $0.00
Pins@$1.54 Per Cell (Example-288) $0.00

Optional - For Models with Lid Only:

If PVC pins are needed for larger holes:
3/8" PVC pins (per cell) $0.00
1/2" PVC pins (per cell) $0.00
3/4" PVC pins (per cell) $0.00

FOB Milwaukee, Wisconsin.
Prices subject to change without notice.

Copyright © 1998-2015 U.S. Global Resources (USGR). All rights reserved.
Contact USGR :: Top
Web site developed by Infothai CM Co., Ltd.