Dosmatic Models

Dosmatic offers the widest range of models in the industry with flow range from 0.03 gpm to 400 gpm and ratio range from 1:4000 to 1:5. We have summary information for choosing teh correct Dosmatic Injector.

MicroDos ® Injector Series

Tiny and tough—the smallest injector in the industry

MicroDos Operating Principle

Installed directly in the fluid supply line, the injector operates without electricity, using fluid pressure as the power source. The fluid drives the injector, which pulls the required percentage of concentrate directly from the chemical solution container. Inside the Dosmatic,patented mixing chamber the concentrate is mixed with the fluid, and the fluid pressure forces the mixed solution downstream. The amount of concentrate will be directly proportional to the volume of fluid entering the injector, regardless of variations in flow or pressure.

Model	Flow Rate	Injection Ratios Adjustable Range	Operating Pressures	Inlet/Outlet Connections
MicroDos II 2%	0.1 – 3.5 gpm	0.50 – 2% (1:200 – 1:50)	6 – 100 psi	1/2″
MicroDos II 5%	0.03 – 3.5 gpm	2 – 5% (1:50 – 1:20)	6 – 100 psi	1/2″

MiniDos®- 0.4%, 1%, 2.5%, 5%,10%, 20% Injector Series

The most versatile injector in the industry
Replaces the A10 & A12 product lines.
Flow Rates 0.03 – 12 gpm (0,11 l/mn – 45,42 l/mn)
Injection Ratios 1:4000-1:5 (0.025%- 20%)

Operating Principle

Installed directly in the fluid supply line, the injector operates without electricity, using fluid pressure as the power source.

The fluid drives the injector, which pulls the required percentage concentrate directly from the chemical solution container.Inside the Dosmatic, patented mixing chamber the concentrate is mixed with the fluid, and the fluid pressure forces the mixed solution downstream.

The amount of concentrate Ill will be directly proportional to the volume of fluid entering the injector, regardless
of variations in flow or pressure.

Dosmatic offers the widest range of models in the Industry
with flow range from 0.03 gpm to 400 gpm and injection ratios from 1:8000 to 1:5
MiniDos 0.4%	0.03 – 12 gpm	0.025 – 0.4%	(1:4000 – 1:250)	6 – 140 psi	3/4″ npt
MiniDos 1%	0.03 – 12 gpm	0.20 – 1%	(1:500 – 1:100)	6 – 140 psi	3/4″ npt
MiniDos 2.5%	0.03 – 12 gpm	0.50 – 2.5%	(1:200 – 1:40)	6 – 140 psi	3/4″ npt
MiniDos 5%	0.03 – 12 gpm	1 – 5%	(1:100 – 1:20)	6 – 140 psi	3/4″ npt
MiniDos 10%	0.03 – 10 gpm	2 – 10%	(1:50 – 1:10)	6 – 65 psi	3/4″ npt
MiniDos 20%	0.03 – 7 gpm	4 – 20 %	(1:25 – 1:5)	6 – 65 psi	3/4″ npt

SuperDos®- 15TF, 20, 30, 45, 90 Injector Series

Low dilution, high flow chemical injector in the industry
Replaces the Advantage line of injectors.
Flow Rates 0.04 – 90 gpm / 0,15 l/mn – 340.69 l/mn
Injection Ratios 1:200-1:20 or 0.5%-5.0%

Dosmatic introduces new “rotating” lower end on its SuperDos® 0.3% models for improved usability.

The SuperDos 0.3% models have been re-engineered with a rotating lower end. Dosmatic noticed a trend in customers having a twisted and tangled suction hose after adjusting the ratio sleeve on their lower ends. Dosmatic’s engineering department went to work on a solution and developed the rotating lower end. The improvements now allow the customer to adjust their ratio setting (can still be done while in operation) without having to deal with a twisted, tangled suction hose. Dosmatic has also added wrench flats to the suction tube fitting assembly to make maintenance easier and to avoid thread damage.

Model		Flow Rate	Operating Pressure	Pipe Coupling
SuperDos15TF	15 gpm (60 max. psi)	04 – 15 gpm (0,15 – 57 I/mn)	3 – 60 psi (0,21 – 4,1 bar)	1″ NPT/BSP
Model 0.3%	0.025% – 03% (1:4000 – 1:333)
Model 2.5%	0.2% – 2.5% (1:500 -1:40)
Model 5%	0.4% – 5% (1:250 -1:20)
SuperDos	20 gpm (100 max. psi)	.04 – 20 gpm (0,15 – 76 l/mn)	5 – 100 psi (0,34 – 6,9 bar)	1″ NPT/BSP
Model IA	0.2% – 2.3% (1500 – 1:44)
Model 0.3%	0.025% – 0.3% (1:4000 – 1333)
Model 2.5%	0.2% – 2.5% (1:500 – 1:40)
Model 5%	0.4% – 5% (1:250- 1:20)
SuperDos	30 gpm (100 max. psi)	.15 – 30 gpm (0,57 – 114 l/mn)	5 – 100 psi (0,34 – 6,9 bar)	1″ NPT/BSP
Model IA	0.2% – 2.3% (1:500 – 1:44)
Model 0.3%	0.025% – 0.3% (1:4000 -1233)
Model 2.5%	0.2% – 2.5% (1:500 -1:40)
Model 5%	Model 5% 0.4% – 5% (1:250 -1:20)
SuperDos 45	gpm (100 max. psi)	.50 – 45 gpm (1,9 – 170 l/mn)	5 – 100 psi (0,34 – 6,9 bar)	1 1/4″ NPT/BSP
Model 0.3%	0.025% – 0.3% (1:4000 -1:333)
Model 2.5%	0.2% – 2.5% (1:500 -1:40)
SuperDos	80 gpm (100 max. psi)	1- 90 gpm (3,8 – 341 l/mn)	5 – 100 psi (0,34 – 6,9 bar)	1 1/4″ NPT/BSP (Injectors) 2″ slip on pipe connections
Model 2.5%	0.2% – 2.5% (1:500 – 1:40)	1- 90 gpm (3,8 – 341 l/mn)	5 – 100 psi (0,34 – 6,9 bar)	1 1/4″ NPT/BSP (Injectors) 2″ slip on pipe connections
SuperDos	20 gpm (65 max. psi)	.04 – 20 gpm (0,15 – 76 l/mn)	5 – 65 psi (0,34 – 4,5 bar)	1″ NPT/BSP
Model 10%	2% – 10% (1:50 -1:10)	.04 – 20 gpm (0,15 – 76 l/mn)	5 – 65 psi (0,34 – 4,5 bar)	1″ NPT/BSP
SuperDos	45 gpm (80 max. psi)	.50 – 45 gpm (1,9 – 170 I/mm)	5 – 80 psi (0,34 – 5,5 bar)	11/4″ NPT/BSP
Model 5%	0.4% – 5% (1:250 -1:20)	.50 – 45 gpm (1,9 – 170 I/mm)	5 – 80 psi (0,34 – 5,5 bar)	11/4″ NPT/BSP

TurboDos®-100, 200 and 400 Injector Series

High flow, where you need to go
Replaces the T100 Hybrid & T100 product lines.
Flow Rates 20-400gpm or 75.70 l/mn-378,70 l/mn
Injection Ratios 1:4000-1:1000 or .013%-.10%

Dosmatic TurboDos high-flow; non-electric, fluid(water)-driven, proportional injectors offer an economical alternative to traditional electric technology or multiple non-electric injector parallel systems. Capable of injecting up to two chemicals accurately,independently and simultaneously; they reduce the need for multiple injectors. TurboDos can be used with 2″ and 3″ flange irrigation systems and with multiple installation options; making them ideal for high-flow injection applications.

Precise chemical injection—

Proportional positive displacement insures that just the right amount of chemical is injected. Despite fluctuations in flow rate and pressure,theTurboDos injector’s thorough and consistent mixing means that additives are used to maximum benefit. An adjustable ratio sleeve allows you to change your injection rates– quickly and easily—to meet injection needs. Costs are reduced because of less wasted chemical in the injection process.