Seed Processing Equipment
STS-WM2, STS-WM3
Wall Mount Air Separators
Finally, a machine that literally pays for itself. The Wall Mount Air Separator System uses a pressurized vacuum method to provide high efficiency cleaning and precise upgrade separations of various agricultural and industrial products. Its ability to separate less viable and immature seeds, improves the quality of the lot and therefore, enhances seed germination. In addition, the user has the ability to control air flow and feed rate which helps to achieve purity.
When seed enters the feed chute, the light, split, and broken seed, chaff and other debris are lifted by air flow up through the column and are separated into 2 or 3 batching compartments (depending upon the model).
Seed Separator Features
- Two modes of operation: permanent continuous feed or small lot batch separation
- Total visibility of all product movement
- User friendly
- Responsive air and product control
- Safety flow relay switch prevents seed contamination (WM3 only)
- Calibration is fast and simple
- Few moving parts
- Environmentally clean
- Fits into small areas
- Portable and locking wheel control panel and cabinet
Seed Separator Uses
- General Cleaning: The STS-WM2 & STS-WM3 can be used to clean seed by removing large particle/granular debris, chaff, inert material, pieces of broken seeds and other light unwanted materials.
- Close Grading: The STS-WM2 & STS-WM3 can be used to “grade” seed based on density or volume weight (e.g., removal of light seed or insect damaged seed.)
- Precision Upgrading: Detailed upgrading ,based upon a stratified, vacuum pressurized, calibrated air stream. The STS-WM2 & STS-WM3 will separate partially filled and immature seeds and improve the quality of the lot and therefore, enhance seed lot viability and germination.
Proven Seed Separation
The STS-WM2 & STS-WM3 separators have been proven to be highly effective in upgrading product and has accomplished what other processing machines do collectively using only a single-step process.
The WM2 & WM3 has been proven to recover seed losses from other processing machines. As much as 25-50% more seed yield was gained from the recovery with the same or higher germination.
Seed Separator Specifications
STS-WM2 | (Approx.) |
---|---|
Overall Dimensions: | height: 84″ width: 22″ depth: 24″ (w/shelf section) |
Vibrator Feeder: | 115 V/60 Hz (AC single phase) |
Wall Controller: | 115 V/60 Hz (AC single phase) |
Total System: | 12 AMPS |
Seeds per lb. Capacity | 25-50 lb/hr. (depending on product density) |
STS-WM3 | (Approx.) |
---|---|
Overall Dimensions: | height: 84″ width: 24″ depth: 10″ (w/shelf section) |
Vibrator Feeder: | 115 V/60 Hz (AC single phase) |
Wall Controller: | 115 V/60 Hz (AC single phase) |
Automatic Vacuum Control | 115 V/60 Hz (AC single phase) |
Total System: | 16 AMPS |
Seeds per lb. Capacity | 25-75 lb/hr. (depending on product density) |
Seed Separator Options:
- Vibratory feeder 230v150160Hz(AC single phase)
- Controller 230 V. 50/60 Hz (AC single phase)
- Vacuum 230 V. 50/60 Hz (AC single phase)
Smaller and larger scale models available – built to customer specifications. These specifications are general and are subject to change without notice.
STS WM2 Lab Precision Separator
- (1/115V, 60 Hz) $4,000 to $4,300
- (1/230V, 50 Hz) $5,500 to $5,800
This is our shop vacuum wall mounted Separator System. This precision separator comes with a precision crank handle for vacuum calibration. Includes two basic upper chamber seed collection containers. The system includes a Vibratory Feeder and a Seed Collection box. Also, the system has a built-in acrylic shelf and a controller enclosure. This separator comes with a standard (1 15V, 1 phase, 60Hz) 195-CFM shop vacuum unit. The 230V, 1 phase, 50 Hz is rated at 175-CFM (Up to 40 lbs/hr.)
STS-WM2E Lab Precision Separator
- (230V, 1 Ph, 50/60 Hz) $8,600 to $9,500
This is our wall mounted Computerized Vacuum Separator System. This is our small size precision separator that includes: Two upper seed collection cups, Built-in acrylic shelf for the Vibratory Feeder and Feed Hopper. Also includes a Seed Collection box. This system comes with a built-in Computerized Digital keypad controller. This system has – 480 CFM vacuum with locking casters. (Up to 75 lbs. Per hour)
STS-WM3 (Deluxe) Precision Separator
- (1/230V, 50/60Hz) $14,500 to $16,000
This is our wall mounted Separator System. This is our larger wall mount Deluxe precision separator that includes a built-in acrylic shelf for the Vibratory Feeder and Feed Hopper. Also, includes a Seed Collection box. This system comes with an LED programmable computerized keypad vacuum control. This system has 800 CFM Vacuum with locking casters. (Up to 125 lbs per hour depending on species)
Excludes: Crating, Shipping and Handling
Crating Cost approximately: $165.00 -$475.00 (Depending
on model)
PRICES EXCLUDE CRATING, SHIPPING & HANDLING.
Approximate price depends upon accessories, style or type, voltage and seed specie. Prices vary depending upon multiple options. On large units, request for prices.