Vent Controller Gear Motor

What Size Gear Motor?

Optimize System

FEATURES

The VC2000 should be used in high wind areas, with glass vents or elbow arms.

VC 100A MOTOR
VC 2000 MOTOR
3 RPM VC 2000 MOTOR
1/20 Horsepower-T.E.N.V. 1/5 Horsepower – T.E.F.C 1/5 Horsepower – T.E.F.C
115 Volt-60 Hz.-.68 amp 115 Volt-60 Hz. – 2.5 amp 115 Volt-60 Hz. – 2.5 amp
Ball bearing motor Ball bearing motor Ball bearing motor
1600 RPM 1600 RPM 1600 RPM
Thermal overload protection-automatic reset Thermal overload protection-automatic reset Thermal overload protection-automatic reset
Quick reversing Quick reversing Quick reversing
Continuous Duty Continuous Duty Continuous Duty
Copper windings-insulation class
VC 100A GEAR REDUCER
VC 2000 GEAR REDUCER
VC 2000 GEAR REDUCER
Adjustable torque limit switch assembly Adjustable torque limit switch assembly Adjustable torque limit switch assembly
Output torque 500 in. lb. / 56 Nm Output torque 1500 in. lb. / 169 Nm Output torque 1500 in. lb. / 169 Nm
Total gear ratio 1900:1 final output .84 RPM Total gear ratio 1350:1 final output 1.2 RPM Total gear ratio 550:1 final output 3 RPM
Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease
Dual output shaft Dual output shaft Dual output shaft

WHY DO GROWERS AND INSTALLERS PREFER OUR GEAR MOTORS?

  • Wadsworth vent systems offer simplicity in design, installation and operation.
  • Simple to operate
  • Easy to install
    • Only 2 wires to reverse direction
  • Powerful, reliable, durable
  • Maintenance free
  • Synthetic grease lasts the life of the unit
  • Reverse torque
  • Over-torque protection stops the motor in case of mechanical binding that could damage your vent.
  • Limit Assemblies stop the motor in normal operation when it is fully open or fully closed.

EXAMPLES

VC 100A MOTOR
VC 2000 MOTOR
3 RPM VC 2000 MOTOR

Lifts up to 75′ of 4′ polycarbonate roof ridge vent

Lifts up to 325′ of 54″ polycarbonate roof ridge vent

 Lifts up to 325′ of 4′ polycarbonate roof ridge vent or 400′ of 4′ polycarbonate side vent

VEnt gear motor