COLD WATER PICK-UP MOUNT MODELS
-
Triplex plunger pump with ceramic plungers, stainless steel valves and thermal relief - Adjustable pressure
- Chemical Injection
- Swivel hose reel with 100′ non-marking hose, not available on 2508PM.
- Trigger Gun
- 36″ two piece wand
- Multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injection
- Powder coat frame
- Roto-molded tank with automatic shut-off if machine runs dry
- Fits in all standard bed pickups, be sure to check weight capacity before filling tank
Triplex plunger pump with ceramic plungers, stainless steel valves and thermal relief| Model | PSI/bar | GPM/Ipm | HP | Engine | Water Tank Capacity |
Engine Tank Capacity |
Burner Fuel Capacity |
Dimensions L x W x H |
Ship Weight |
|---|---|---|---|---|---|---|---|---|---|
| 25006MPM | 2500 / 172.5 | 3 / 11.4 | 6.5 | Honda | 150 | 3.9 Quarts | N/A | 72″ x 62″ x 38″ | 55 lbs. |
| 25006PM | 2500 / 172.5 | 3 / 11.4 | 6.5 | Honda | 300 | 3.9 Quarts | N/A | 72″ x 62″ x 38″ | 600 lbs. |
| These machines are intended to be used outdoors and must be properly vented if used indoors. | |||||||||