HOT WATER SH SERIES DIESEL FIRED MODELS
- Triplex plunger pump with ceramic plungers, stainless steel valves and thermal relief
- 35′ Power cord with ground fault interrupter
- Adjustable pressure
- Adjustable Thermostat and pressure pop-off
- Chemical Injection
- 50′ pressure hose
- Trigger Gun
- Dual wand with side handle and detergent tip
- Quick change tips in 0°,15°,25° and 40°
- Totally enclosed motor
- Powder coated frame with wand/hose rack
- 13″ pneumatic tires with tube
- Schedule 80 coil with stainless cold wrap
- Rust free burner fuel tank
- Oil fired burner uses diesel fuel or kerosene to achieve a 140° fahrenheit rise in water temperature
- Look for optional accessories like the swivel hose reel that mounts to the frame
All hot water machines must be properly vented if operated indoors.
xxx
| Model | PSI/bar | GPM/Ipm | HP | Voltage/Engine | Phase / Fuel Tank Cap. |
Burner Fuel Capacity |
Dimensions L x W x H |
Ship Weight |
|---|---|---|---|---|---|---|---|---|
| 450SHDE | 1450 / 100 | 2 / 7.6 | 2 | 120 Volt / 20 Amp | Single Phase | 5 Gallon | 27″ x 21″ x 42″ 350 lbs. | |
| 000SHDE* | 1000 / 69 | 3 / 11.4 | 2 | 120 Volt / 20 Amp | Single Phase | 5 Gallon | 34″ x 27″ x 47″ | 350 lbs. |
| 500SHDE* | 1500 / 103.5 | 3 / 11.4 | 3 | 230 Volt / 20 Amp | Single Phase | 5 Gallon | 34″ x 27″ x 47″ | 350 lbs. |
| !0005SHDE* | 2000 / 138 | 3 / 11.4 | 5 | 230 Volt / 20 Amp | Single Phase | 5 Gallon | 34″ x 27″ x 47″ | 360 lbs. |
| !000SHDE* | 2000 / 138 | 4 / 15.2 | 5 | 230 Volt / 25 Amp | Single Phase | 5 Gallon | 34″ x 27″ x 47″ | 570 lbs. |
| ,000SHDE* | 3000 / 207 | 4 / 15.2 | 7.5 | 230 Volt / 34 Amp | Single Phase | 5 Gallon | 34″ x 27″ x 47″ 600 lbs. | |
| ***All electric models shown are available in Three Phase upon request. | ||||||||
*** Denotes model is CETL approved to UL and CSA Standards