3 1/8" AND 2.9" STANDARD LOWERED HEIGHT PALLET TRUCKS
5000 & 5500 Pound Capacity
Fork Fork Lowered Weight
Widths Lengths Heights Capacity
27, 24, 21" 48, 42, 36" 3 1/8" 5000 lbs.
27, 24, 21" 48, 42, 36" 2.9" 5000 lbs.
27, 24, 21" 48, 42, 36" 3 1/8" 5500 lbs.
27, 24, 21" 48, 42, 36" 2.9" 5500 lbs.
All American made, Pallet Mule offers the largest combination of standard size pallet trucks in the industry (over 36), with one piece ductile iron pump, polyurethane on aluminum hub steering and load wheels (standard).
1 3/4", 2" AND 2 1/2" LOWERED HEIGHT PALLET TRUCKS
Fork Maximum Minimum Maximum Minimum Maximum
Width Length Length Width Width Capacity
6 1/8" 96" 24" 60" 14" 6000 lbs.
6 1/8" 96" 24" 60" 14" 5000 lbs.
5" 72" 24" 60" 14" 3000 lbs.
4" 48" 24" 60" 14" 2000 lbs.
3" 48" 24" 60" 14" 1000 lbs.
Solid 1" x 3" steel push rods set in 6 1/8" wide forks allow 6000 pounds of lift from as low as 2" off the floor.
Cast ductile iron entry fork with steel entry wheels makes these models the strongest lowered height pallet trucks available. Polyurethane load wheels optional on 2" lowered height.
SPECIAL LENGTH, WIDTH AND FORK CAPACITY PALLET TRUCKS
Fork Maximum Minimum Maximum Minimum Maximum
Width Length Length Width Width Capacity
6.25" 144" 24" 72" 14" 6500 lbs.
6.25" 144" 24" 72" 14" 6000 lbs.
6.25" 144" 24" 72" 14" 5500 lbs.
6.25" 144" 24" 72" 14" 5000 lbs.
5" 96" 24" 72" 14" 3000 lbs.
4" 60" 24" 72" 14" 2000 lbs.
3" 48" 24" 72" 14" 1000 lbs.
Special Applications require special pallet trucks. The Pallet Mule Brand is recognized as a leader in special pallet truck applications. Just call with your special requirement, and our engineers will design the truck to move your loads.
5000, 5500, 6000 & 6500 Pound Capacity
5" Wide Forks, 3000 Pound Capacity
4" Wide Forks, 2000 Pound Capacity • 3" Wide Forks, 1000 Pound Capacity
CORROSION RESISTANT PALLET TRUCKS
5000, 6000, 6500 Pound Capacity
Fork Maximum Minimum Maximum Minimum Maximum
Width Length Length Width Width Capacity
6" 96" 24" 60" 14" 6500 lbs
6" 96" 24" 60" 14" 6000 lbs.
6" 96" 24" 60" 14" 5000 lbs
5" 72" 24" 60" 14" 3000 I bs
4" 48" 24" 60" 14" 2000 lbs.
3" 48" 24" 60" 14" 1000 lbs.
Corrosion Resistant Pallet Trucks are ideal for cold storage, freezers, and fish, poultry and meat processing. Zinc plated, stainless steel components and 15 grease inserts make this the unit to use in wet applications or corrosive environments.
FOUR-WAY ENTRY PALLET TRUCKS ( 1 3/4" LOWERED HEIGHT )
5000 & 6000 Pound Capacity
Standard Standard Maximum Length Width Capacity
48" 33" 6000 lbs.
42" 33" 6000 lbs.
36" 33" 6000 lbs.
Four-Way Entry Pallet Trucks are designed for
easy entry into a standard GMA 40 x 48 pallet. Pallet Mule
four-ways come with standard 1 3/4" steel load wheels. This unit with its superstrong frame can be customized to your pallet requirements and is designed to accommodate Chep style returnable pallets.
SINGLE FORK PALLET TRUCKS
3000 Pound Capacity
Fork Maximum Minimum Lowered Number of
Width Length Length Height Load Wheels
12" 72" 24" 3.25", 2.5", 2.0" 2
9" 72" 24" 3.25", 2.5", 2.0" 2
8" 72" 24" 3.25", 2.5", 2.0" 2 Tandem
6" 72" 24" 3.25", 2.5", 2.0" 1
Single Fork Pallet Trucks are designed to lift
and move loads where the fork opening is as narrow as 6 1/2". Pallet Mule’s solid steel stabilizer bar combined with caster wheels makes for easy steering and load stability.
SKID TRUCKS
5000 to 10,000 Pound Capacity
Fork Maximum Minimum Width Length Length
27" 96" 24"
24" 96" 24"
20" 96" 24"
18" 96" 24"
Pallet Mule Skid Trucks are made with one piece solid decks in four widths (additional widths available) and any even number length between 24" and 96". These units are
available from 5000 to 10,000 pound
capacities. Lowered heights are 5", 6", 7", 8", 9" and 10".
ROLL AND REEL TRUCK
5000 to 10,000 Pound Capacity
Maximum Diameter and Minimum Diameter Roll That Can be Handled by the Same Truck
Maximum Minimum
Diameter Diameter
80" 56"
70" 50"
60" 44"
56" 40"
50" 38"
44" 34"
40" 30"
36" 28"
34" 26"
25" 18"
Roll and Reel Trucks are designed to pick up, transport, and set down your specific rolled materials. Angled forks cradle the materials. Trucks can be designed to handle up to 10,000 pound rolls or reels.
6000AA & 6500AA EXTENDED USE PALLET TRUCKS
6000 & 6500 Pound Capacity
6000AA Unit
• 6000 pound capacity.
• Cast toes with bracing.
• Extra heavy frame.
• Increased capacity pump for easy lifting.
6500AA Unit
• 6500 pound capacity.
• Extra heavy duty handle assembly.
• Solid steel push rods double braced for maximum strength.
• Extra heavy duty frame with reinforced bracing in key stress point.
HIGH CAPACITY PALLET MULES
8000, 10,000 &12,000 Pound Capacity
Weight Fork Maximum Minimum Maximum Minimum Capacity Width Length Length Width Width
8,000 lbs. 8" 120" 24" 60′ 20"
10,000 lbs. 9" 120" 24" 60" 20"
12,000 lbs. 9" 96" 24" 60" 20"
Eight inch wide forks on 8,000 pound trucks,
nine inch wide forks on 10,000 and 12,000 pound
units, makes these the perfect units for:
• moving and storage containers
• skidded machinery
• plywood
• sheetrock, etc.
STRADDLE TRUCKS
2500 to 4500 Pound Capacity
Four inch wide intermediate lifting forks, are adjustable across the carriage. Each straddle truck is custom designed to fit around the specific application, using either 6 or 3 inch straddle arms with fully adjustable lifting forks across the width, and an overall lift travel of 5 inches in height.
• Perfect for applications where a sit-down rider is restricted.
• Uses adjustable class 2 forks.
• Custom sizes upon request.
M-36 / M-36E STRADDLE TRUCKS
The M-36 is designed to lift palletized loads of up to 3,000 pounds and can be used as an alternative to a fork lift. The 36" of fork lift is available in a manual model M36 (1/2" per stroke).
Also available in electric powered unit M36E
OPTIONAL EQUIPMENT a CUSTOM APPLICATIONS
ASK ABOUT OUR CUSTOM
MANUFACTURING CAPABILITIES
GREASE FITTINGS
15 grease fittings, stainless steel plunger and piston, cover components subject to corrosion.
STEEL WHEELS
Steel steering and load wheels are available for easy rolling on hard surface floors.
TANDOM LOAD WHEELS
For unusually rough or gaping floors. Available in polyurethane or steel.
1C
LOAD BACK REST
Can be added to any truck to permit handling of high-cubage loads.
RAMP BRAKE AND OR RAMP PARK BRAKE
Increase operator safety on ramps. The ramp park brake secures the truck from movement on the floor.
LOAD
9P, STABILIZER
BAR
Provides added load stability when narrow width trucks are required.
3C
SKID ADAPTFR
Transforms the truck for either pallet or skid use. Secures easily in a vertical position. Available in 3,4,5 inch heights.