Aerotech Advantage Fans

Aerotech Advantage® Fans

36″ and 48″

Advantage Fans

Advantage fan

The Advantage® fan line is built for performance and reliability utilizing a number of features. This is the fan for producers who demand the best value.

The cast aluminum 3-blade airfoil-design propeller moves more air per watt than stamped steel blades. The high airflow performance (CFM) reduces the total fan requirements and have certified CFM/Watt air performance ratings by BESS Lab. The high efficiency continues inside the fan with capacitor-start/capacitorrun motors totally enclosed for protection from the environment. Exclusive motor/bearing supports are streamlined for minimal air resistance while providing solid 4-way support.

The durability continues on the outside with tapered housings and extended cones to smooth the airflow and dramatically improve efficiency. The housing bottom slopes out toward exterior drain holes to keep the building drier.

Contact USGR for more information.

PRODUCT INFORMATION

Advantage fans in the field

  • High airflow performance reduces total number of fans needed
  • Certified CFM/Watt air performance numbers by BESS Lab
  • Cast-aluminum 3-blade airfoil propeller
  • Tapered housings and extended cones
  • Housing bottom slopes outward
  • High-efficiency enclosed motors
  • Stainless steel hardware
  • PVC coated guards
  • Exclusive motor/bearing supports

Rugged AeroLink PlusTm belts

Advantage fan belt tightenersReduced vibration, wear and stretching add up to long life. In addition, AeroLink Plus belts eliminate the need for a belt tightener.

High quality belt tightener

For a low maintenance alternative Aerotech offers a simple automotive style belt tightener designed to reduce wear on drive components and keep a constant tension for optimal performance. The belt is constructed of aramid fiber for long wear and durability in harsh environments.

Larger-diameter pulleys

Large pulleys provide greater belt wrap. This means belt tension can be lower without slippage, so there’s less stress that reduces the life of belts and bearings.

The bottom line is Aerotech quality and efficiency doesn’t cost more. It pays, year after year.

Performance Information: Fan complete with discharge cone, guard and inlet shutter.
0.0″ SP 0.05″ SP 0.10″ SP 0.15″ SP BESS Lab No.
Catalog
No.
Prop.
Dia.
Drive
Type
Motor
HP
Prop
RPM
Max.
BHP
CFM CFM Watt CFM CFM Watt CFM CFM Watt CFM CFM Watt
AT36ZC
AT365ZC
36″
36″
Direct
Belt
1/2
1/2
850
770
0.60
0.67
12,620
12,570
21.0
21.4
11,870
11,800
18.7
19.4
10,920
10,880
16.6
17.1
9,950
9,890
14.7
15.2
96151
93239
AT361ZC
AT3615ZC
36″
36″
Belt
Belt
1
1-1/2
1010
1075
1.35
1.63
15,850
16,910
13.4
11.8
15,150
16,260
12.4
11.0
14,560
15,700
11.7
10.4
13,930
15,110
11.0
9.8
04084
04085
AT481ZC AT4815ZC
AT482ZC
48″
48″
48″
Belt Belt Belt 1
1-1/2
2
575
635
675
1.26
1.69
2.20
25,000
27,500
28,900
24.1
18.8
15.9
23,500
26,100
27,800
21.7
17.2
15.0
22,000
24,800
26,600
19.6
15.9
14.0
20,200
23,300
25,100
17.5
14.5
13.0
92086
92092
04100

Note:
1. The ratings shown are based on tests and procedures performed at the BESS Lab, University of Illinois in accordance with ASHRAE Standard 51-1999.
2. BHP values were not measured at BESS Lab. The BHP values shown were derived from actual Watt measurements using motor efficiency values supplied by the motor manufacturers.
3. Performance shown is for installation type A: Free inlet, Free outlet.
4. Speed (RPM) shown is nominal. Performance is based on actual test speed.
5. Performance ratings include the effects of a discharge cone, guard and inlet shutter in the airstream.